7VQPCY: Aerospace Engineer (BS/MS Aerospace Engineering) with twenty two (22) plus years of experience as a primary structures design engineer. Responsibilities encompass full lifecycle composite design, development, and repair for aerospace and space vehicles. Experience has led to thorough knowledge of CATIA, CPD, FiberSim, and composite design methods.

K758IY: Aerospace Engineer (BS/MS Aerospace Engineering) with five (5) plus years of experience as a structural analysis engineer supporting space systems. Responsibilities encompass FEA, hand calculations, and structural optimization. Experience has led to thorough knowledge of ANSYS, FEMAP, NASTRAN, and structural analysis methods.

JVV0FF: Aerospace Engineer (BSAE/MBA) with fifteen (15) plus years of experience in composite structures, structural design, and engineering leadership. Responsibilities encompass managing integrated product teams, overseeing composite and metallic design, and driving cost, schedule, and quality performance. Experience has led to thorough knowledge of composite design methods, CAD/PLM tools, work statement development, and EVM practices.

2TGV8M: Turbomachinery Engineer (BSAE) with five (5) plus years of experience in turbomachinery design and analysis. Responsibilities encompass design leadership, modeling, and analysis for major propulsion programs. Experience has led to thorough knowledge of turbomachinery design tools and engineering workflows.

0F0REA: Turbomachinery Design Engineer (BSME) with fourteen (14) plus years of experience in aerospace and power generation. Responsibilities encompass 3D modeling, cradle to grave turbomachinery design, defining engine test parameters, and supplier interfacing. Experience has led to thorough knowledge of NX, ANSYS, MS Office, Lean manufacturing, and design of experiments.

4DSUCU: Aero Thermal / Turbomachinery Engineer (MSME/BSME) with three (3) plus years of experience analyzing and designing aircraft turbine engines. Responsibilities encompass aerodynamic and thermal analysis, calculating cooling pressures and backflow margins, and performing data acquisition and analysis. Experience has led to thorough knowledge of SolidWorks, ANSYS, Multisim, and MATLAB.

YWRLC3: Electrical Engineer (BSEE) with five (5) plus years of experience in systems level electrical design for military aircraft and missiles. Responsibilities encompass circuit design, power electronics, electrical diagrams, acceptance testing, and supplier/customer interfacing. Experience has led to thorough knowledge of SAP, EBR, AutoCAD, Altium, and DOORS.

KFVMLN: Autonomy Engineer (BSEE, MSEE – Control Systems, MS Applied Mathematics & Computer Science) with twelve (12) plus years of experience developing behavioral and control algorithms for autonomous systems. Responsibilities encompass control stack development, high fidelity simulation, and autonomy software integration. Experience has led to thorough knowledge of control theory, robotics, and autonomy simulation frameworks.

O6WKPK: GNC Subject Matter Expert (BSEE, MS Computer Science & Real Time Control Systems, PhD Aerospace Engineering) with twenty five (25) plus years of experience delivering GNC solutions for major aerospace programs. Responsibilities encompass algorithm development, advisory engineering, mentoring, and R&D. Experience has led to thorough knowledge of advanced GNC theory, simulation, and real time control systems.

X18H2A: Chief Engineer (MBA) with twenty (20) plus years of experience in aerospace, space operations, and missile defense supporting national security missions. Responsibilities encompass leading large multidisciplinary engineering and acquisition teams, implementing systems engineering processes, and managing multimillion dollar defense programs across air, space, cyber, and missile defense domains. Experience has led to thorough knowledge of DoD systems engineering and acquisition, modeling and simulation, C2BMC architectures, and certified program management frameworks including PMP and SPRDE Level III.

C3XY1C: Vice President of Sales (BEng) with thirty (30) plus years of experience in aerospace, defense, and industrial manufacturing. Responsibilities encompass developing sales strategies, securing long term contracts, and leading regional and international sales teams across commercial and defense markets. Experience has led to thorough knowledge of aerospace manufacturing processes, wiring and electronic assemblies, RFQ and contract negotiation, CRM platforms, and cross functional program management.

7X1KYY: Vice President of Operations (MBA) with twenty five (25) plus years of experience in aerospace manufacturing, MRO, airline operations, and global aviation supply chain management. Responsibilities encompass leading multi site maintenance operations, managing large supplier contracts, and driving performance improvements through analytics and continuous improvement. Experience has led to thorough knowledge of FAA Part 145 compliance, SAP ERP, Lean/Kaizen, ISO 9001 and AS9110 systems, NADCAP certification, and advanced supply chain optimization.

DMFNLJ: Program Manager (MBA/BS) with fifteen (15) plus years of experience in aerospace and technology operations. Responsibilities encompass leading technical programs, guiding engineering teams through development, managing budgets and schedules, and mitigating program risks. Experience has led to thorough knowledge of MS Project, SharePoint, AutoCAD, CATIA, and Lean manufacturing, with certifications including ScrumMaster and Scrum Product Owner.

IEMJDJ: Guidance, Navigation, and Control Engineer (MSAE/BSAE) with two (2) plus years of experience developing UAV, missile, and fixed wing GNC systems. Responsibilities encompass building testbeds, developing GPS/GNC algorithms, performing Monte Carlo verification, and supporting hardware in the loop simulations. Experience has led to thorough knowledge of MATLAB/Simulink, C++, Python, ANSYS, and SolidWorks.

Q29AJQ: Guidance, Navigation, and Control Engineer (MSME/BSME) with seven (7) plus years of experience in hypersonics, spacecraft, air superiority systems, and guided munitions. Responsibilities encompass developing GNC algorithms, simulation environments, trajectory optimization, and automated testing. Experience has led to thorough knowledge of C++, Python, MATLAB/Simulink, and Azure DevOps.

NHNJ62: GNC Subject Matter Expert (BSEE, MS Computer Science & Real Time Control Systems, PhD Aerospace Engineering) with twenty five (25) plus years of experience delivering GNC solutions for major aerospace programs. Responsibilities encompass algorithm development, advisory engineering, mentoring, and R&D. Experience has led to thorough knowledge of advanced GNC theory, simulation, and real time control systems.

FKEVAI: Manufacturing Engineer (BSME) with three (3) plus years of experience in machining and additive manufacturing operations. Responsibilities encompass process improvements, tooling and fixture design, and process documentation. Experience has led to thorough knowledge of composites, prepreg manufacturing, AS9100, CREO, and SolidWorks.

KUL0PD: Manufacturing Engineer (BSME) with ten (10) plus years of experience in production operations, rocket motor manufacturing, and R&D process optimization. Responsibilities encompass cross functional project leadership, workflow improvements, Lean/Six Sigma implementation, and documentation development. Experience has led to thorough knowledge of process optimization tools, workflow redesign, SOP development, and continuous improvement.

FUBXRJ: Senior Materials and Process Engineer (BS Materials Science, MS Polymer Science, PhD Polymer Engineering) with twenty (20) plus years of experience leading advanced manufacturing and materials initiatives. Responsibilities encompass developing high temperature materials, driving manufacturing strategy, and leading cross functional teams. Experience has led to thorough knowledge of polymer systems, advanced materials processing, and aerospace/defense manufacturing.

PBTQZ9: Materials and Process Engineer (BSChE) with two (2) plus years of experience in composite materials, thermal processing, and contamination analysis. Responsibilities encompass CFRP autoclave profiling, honeycomb core evaluations, composite layup design, destructive inspection, and production support. Experience has led to thorough knowledge of FTIR, TGA, TMA, composite processing, and contamination characterization.

I0ZEG0: Aerospace Engineer (BSAE/MBA) with fifteen (15) plus years of experience in composite structures, structural design, and engineering leadership. Responsibilities encompass managing integrated product teams, overseeing composite and metallic design, and driving cost, schedule, and quality performance. Experience has led to thorough knowledge of composite design methods, CAD/PLM tools, work statement development, and EVM practices.

1HFHCI: Senior Design Engineer (BSME) with seven (7) plus years of experience designing solid rocket motors. Responsibilities encompass manifold, casing, insulation, separation system, and nozzle design, as well as mechanical testing and design of experiments. Experience has led to thorough knowledge of CREO, SolidWorks, ANSYS, MATLAB, GD&T, DFM, and DFAM.

YAXZWL: Senior Mechanical Engineer (MS Physics) with fifteen (15) plus years of experience in aerospace, defense, automotive, and industrial optomechanical systems. Responsibilities encompass leading hardware programs from concept through production, developing precision optomechanical and LiDAR systems, and driving DFM/DFA improvements for high volume manufacturing. Experience has led to thorough knowledge of optomechanical manufacturing, precision machining, injection molding, SolidWorks, Zemax, GD&T, FMEA, and PLM workflows.

9761SY: Mechanical Design Engineer (MSME/BSME) with three (3) plus years of experience designing turbomachinery for military and high Mach engines. Responsibilities encompass nozzle, compressor vane, exhaust, and combustion design, prototype development, and finite element analysis. Experience has led to thorough knowledge of NX, Inventor, and ANSYS.

6M4CI4: Mechanical Engineer (BSME) with three (3) plus years of experience in UAS airframe design and rapid prototyping. Responsibilities encompass UAV system integration, structural and thermal analysis, payload design, configuration control, and flight test support. Experience has led to thorough knowledge of SolidWorks, FEA, GD&T, additive manufacturing, CNC fabrication, and TDP development.

QB923V: Mechanical Engineer (BSME) with ten (10) plus years of experience in UAS and UAV system development, airframe design, and full stack hardware integration. Responsibilities encompass system level architecture, airframe and payload design, structural and thermal analysis, rapid prototyping, and validation testing. Experience has led to thorough knowledge of SolidWorks, FEA/CFD, GD&T, additive and CNC manufacturing, electromechanical integration, and TDP development.

GKNW5P: Senior Structural Analysis Engineer (PhD Mechanical Engineering) with twenty (20) plus years of experience in aerospace, automotive, and research environments. Responsibilities encompass FEA, fatigue and fracture analysis, FSI modeling, and AI based defect detection. Experience has led to thorough knowledge of advanced structural analysis, R&D leadership, lab management, and cross functional engineering collaboration.

M3WG1Q: Senior Structural Analysis Engineer (PhD Mechanical & Aerospace Engineering) with fifteen (15) plus years of experience performing stress and fatigue analysis for aerospace structures. Responsibilities encompass FEA, classical hand calculations, and mentoring engineering teams. Experience has led to thorough knowledge of ANSYS, structural mechanics, and advanced analysis methods.

KNSKON: Senior Engine Turbine Designer (BSME – Materials Science, MS Applied Statistics) with fifteen (15) plus years of experience in turbine and mechanical design. Responsibilities encompass NX CAD modeling, drawing release, test coordination, and non conformance support. Experience has led to thorough knowledge of turbine design, materials evaluation, and engineering documentation.

YVZIU2: Mechanical Engineer (BS/MS/PhD Mechanical Engineering – Rotordynamics) with twenty five (25) plus years of experience in turbomachinery and rotordynamic systems. Responsibilities encompass theoretical and applied rotordynamics, R&D, and engineering support for OEM applications. Experience has led to thorough knowledge of turbomachinery modeling, vibration analysis, and advanced rotordynamic theory.

M480IJ: Robotics / Autonomy Engineer (BSME, MS Industrial Engineering & Robotics) with six (6) plus years of experience developing perception and autonomy software for long range UAV systems. Responsibilities encompass software architecture development, perception algorithms, and autonomy integration for defense applications. Experience has led to thorough knowledge of robotics, computer vision, and autonomous UAV system development.

OG8OD2: Computer Vision / Machine Learning Engineer (PhD) with ten (10) plus years of experience developing perception systems for drones and space based platforms. Responsibilities encompass improving computer vision models, building testbeds, and developing ML algorithms. Experience has led to thorough knowledge of C, C++, MATLAB, CUDA/GPU acceleration, and OpenCV.

XZX1YB: Computer Vision / Machine Learning Engineer (BS/MS) with ten (10) plus years of experience developing real time perception systems for thermal, depth, and multimodal sensors. Responsibilities encompass end to end ML pipeline development, image enhancement, detection algorithms, and 3D perception for embedded systems. Experience has led to thorough knowledge of Python, PyTorch, C/C++, realtime optimization, and GPU/embedded deployment.

B9MFYT: Autonomy Engineer (BSEE, MSEE – Control Systems, MS Applied Mathematics & Computer Science) with twelve (12) plus years of experience developing behavioral and control algorithms for autonomous systems. Responsibilities encompass control stack development, high fidelity simulation, and autonomy software integration. Experience has led to thorough knowledge of control theory, robotics, and autonomy simulation frameworks.

HL6JVF: Senior Design Engineer (BSME) with seven (7) plus years of experience designing solid rocket motors. Responsibilities encompass manifold, casing, insulation, separation system, and nozzle design, as well as mechanical testing and design of experiments. Experience has led to thorough knowledge of CREO, SolidWorks, ANSYS, MATLAB, GD&T, DFM, and DFAM.

3GHOUF: Propellant Scientist – Polymer Engineer (BS Biochemistry, PhD Chemistry) with six (6) plus years of experience supporting DoD energetic materials programs. Responsibilities encompass formulation development, polymer system characterization, and energetic materials testing. Experience has led to thorough knowledge of explosives chemistry, specialty polymers, and energetic material processing.

SPDJEU: R&D Scientist – Energetic Materials and Propellants (BS Chemistry, PhD Physical Chemistry) with thirteen (13) plus years of experience across the full product development lifecycle. Responsibilities encompass ideation, formulation, testing, and implementation of advanced energetic materials. Experience has led to thorough knowledge of materials science, propellant chemistry, and energetic system development.

2BZB5G: Chemist (PhD) with five (5) plus years of experience in polymer systems, propellant materials, and aerospace coatings. Responsibilities encompass polymer aging studies, propellant characterization, coating formulation, and failure analysis. Experience has led to thorough knowledge of spectroscopic and chromatographic methods, DSC, FMEA, AS9100, and technical reporting.

ZG09A2: Chemist (PhD) with eight (8) plus years of experience in solid rocket propellants, polymer bondline systems, composites, and energetic material manufacturing. Responsibilities encompass formulation development, scale up, DFM initiatives, and cross disciplinary problem solving for defense and space systems. Experience has led to thorough knowledge of propellant chemistry, polymer interfaces, composite processing, and energetic material production.

05XIVX: Project Engineer (BSAE) with eight (8) plus years of experience in liquid propulsion systems and spaceflight hardware. Responsibilities encompass customer interfacing, manufacturing and test support, and scaling propulsion hardware for production. Experience has led to thorough knowledge of SolidWorks, GD&T, and additive manufacturing.

G1FFTR: Aerospace / Mechanical Engineer and Program Manager (BS/MS Aerospace Engineering) with twelve (12) plus years of experience in liquid rocket propulsion and hypersonic systems. Responsibilities encompass leading propulsion teams, supporting R&D, and performing modeling, simulation, and analysis. Experience has led to thorough knowledge of liquid rocket engines, hypersonic systems, and propulsion development.

14S922: Systems Engineer (BSME) with ten (10) plus years of experience in defense systems, rocket propulsion programs, and large scale aerospace development. Responsibilities encompass technical leadership, systems engineering across requirements and testing, and program execution for complex defense platforms. Experience has led to thorough knowledge of propulsion modeling, risk management, and cross functional engineering leadership.

R1YM1O: Sales Representative (BBA) with ten (10) plus years of experience in aerospace, defense, and electronic component distribution. Responsibilities encompass managing and growing Mil/Aero accounts, negotiating multimillion dollar agreements, and developing strategic customer and supplier relationships. Experience has led to thorough knowledge of aerospace supply chain operations, contract and pricing negotiations, CRM systems, and distributor–manufacturer coordination within regulated environments.

5O91DU: Vice President of Sales (BEng) with thirty (30) plus years of experience in aerospace, defense, and industrial manufacturing. Responsibilities encompass developing sales strategies, securing long term contracts, and leading regional and international sales teams across commercial and defense markets. Experience has led to thorough knowledge of aerospace manufacturing processes, wiring and electronic assemblies, RFQ and contract negotiation, CRM platforms, and cross functional program management.

PGBOIB: Senior Software Engineer (MSME/BSME) with fifteen (15) plus years of experience in computational geometry, toolpathing, and robotics for additive manufacturing. Responsibilities encompass developing toolpath architectures, computational design tools, and CAD integration. Experience has led to thorough knowledge of C++, Python, C, OpenGL, and CAD customization tools.

H40X50: Senior Software Engineer (PhD) with two (2) plus years of experience in computational geometry, CAD simulation, and AI/ML. Responsibilities encompass developing geometry utilities, geometric modeling, and 3D simulation tools. Experience has led to thorough knowledge of C++, Python, CUDA, and Blender.

AW5HQW: Software Engineer (PhD) with fifteen (15) plus years of experience in computational geometry, toolpathing, and additive manufacturing. Responsibilities encompass software development, geometric algorithm design, and simulation. Experience has led to thorough knowledge of C++, C#, Rust, and Linux.

D8QMPV: Systems Engineer (BSME) with ten (10) plus years of experience in defense systems, rocket propulsion programs, and large scale aerospace development. Responsibilities encompass technical leadership, systems engineering across requirements and testing, and program execution for complex defense platforms. Experience has led to thorough knowledge of propulsion modeling, risk management, and cross functional engineering leadership.

1OYCSD: GNC Subject Matter Expert (BSEE, MS Computer Science & Real Time Control Systems, PhD Aerospace Engineering) with twenty five (25) plus years of experience delivering GNC solutions for major aerospace programs. Responsibilities encompass algorithm development, advisory engineering, mentoring, and R&D. Experience has led to thorough knowledge of advanced GNC theory, simulation, and real time control systems.

68VKJ3: Autonomy Engineer (BSEE, MSEE – Control Systems, MS Applied Mathematics & Computer Science) with twelve (12) plus years of experience developing behavioral and control algorithms for autonomous systems. Responsibilities encompass control stack development, high fidelity simulation, and autonomy software integration. Experience has led to thorough knowledge of control theory, robotics, and autonomy simulation frameworks.